2 BUTTON MODE CHANGING RGB CONTROLLER
12 MODES COLOR CHANGING CONTROLLER
USING ON/OFF TECHNOLOGY INPUT VOLTAGE: 12V AC
OUTPUT VOLTAGE 12V DC
SIZES: 4.5” X 3.5” X 1.5”
WEIGHT: 1 LBS
ITEM#: IL-2B-RGB-C
RECIEVER AND TRANSMITTER RGB CONTROLLER
INPUT VOLTAGE: 12V AC
OUTPUT VOLTAGE 12V DC
RECIEVER SIZE: 4” X 2.5” X 1” TRANSMITTER SIZE: 3.5” X 1.5” X 0.5”
*SEE POWER SUPPLY FOR MORE DETAILS.
ITEM#: IL-RMT-RGB-C
RGB AMPLIFIER USED WITH IL-RMT-RGB-C
INPUT VOLTAGE: 12V AC
OUTPUT VOLTAGE 12V DC
RECIEVER SIZE: 2.24” X 3.25” X 1” TRANSMITTER SIZE: 3.5” X 1.5” X 0.5”
*SEE POWER SUPPLY FOR MORE DETAILS.
ITEM#: IL-RMT-RGB-AMP
SIMPLE WALL MOUNT RGB CONTROLLER
- CHANGE AND MIX COLORS USING MANUAL SWITCHES.
- INPUT VOLTAGE: 12V DC
- SIZES: 4” X 2.5”
ITEM#: IL-SWMC-RGB
DECODERS
DMX 512 DECODER, 3 DMX ADDRESS 6A
IMPACT LIGHTING’S LED DMX 512 DECODERS ADOPT ADVANCED MICROCHIP CONTROL TECHNIQUE AND CAN CONVERT DMX512/1990 DIGITAL SIGNAL INTO 256 GRADE POWER OUTPUT TO CONTROL AND DIM MANY DC LED LIGHTING FIXTURES.
LED DMX 512 DECODERS
256-GRADE STEPLESS DIMMING
IMPACT LIGHTING INC. LED DMX 512 DECODERS CAN CONVERT SIGNAL TO 256 GRADE DIMMING LEVELS, FROM 0 TO 100%, WHICH CAN MEET ANY PROJECT REQUEST.
HUMIDITY/MOISTURE RESISTANT
WITH IP64 PROTECTION DEGREE, ATG LED DMX 512 DECODER CAN OPERATE NORMALLY IN CLOUDY AND HUMID WEATHER CONDITIONS.
OVERLOAD PROTECTION
POWER CAPACITY CAN BE UP TO 100W(12VDC) OR 200W(24VDC) WHICH CAN MEET GENERAL APPLICATION. WITH OVERLOAD PROTECTION COMPONENT, IT WILL SWITCH OFF AUTOMATICALLY WHEN OVERDRIVEN.
SPECIFICATIONS:
SIZE: 2” X 1.5” X 2.25”
VOLTAGE: 12V
WEIGHT: 1LBS
ITEM#: IL-DMX-DECO-3C
DMX 512 DECODER, 1 DMX ADDRESS 6A
FEATURES:
- SINGLE CHANNEL LED DIMMER
- IDEAL DRIVE FOR OUR AMBIENT GLOW STRIPS
- UP TO 6A OUTPUT
- START-DMX ADDRESS SETTING BY DIP-SWITCH
- DMX CONTROL MODE OR MANUAL MODE
SPECIFICATION:
POWER REQUIREMENT: 12~24VDC, 6.5A MAX.
INPUT: 2-PIN TERMINAL SOCKET FOR (DC POWER) AND 3-PIN TERMINAL SOCKET FOR (DMX IN)
OUTPUT: 3-PIN TERMINAL SOCKET FOR (DMX OUT) AND 4-PIN TERMINAL SOCKET, LOADING MAX 6A
HOUSING: SHEET METAL BLACK POWDER FINISH
INGRESS PROTECTION RATING: IP20
CONTROL: DMX-512 (1990)
CONNECTION: TERMINAL
LISTING: CE CERTIFIED
OPERATION TEMPERATURE: -10 DEGC TO +50 DEGC
STORAGE TEMPERATURE: -20 DEGC TO +70 DEGC
DIMENSION: 2.6”(L) X 1.5”(W) X 0.5”(H)INCHES
WEIGHT: 0.33 LBS
ITEM #: IL-DMX-DECO-1C
RGB CONTROLLER AND DECODER COMBINATION
DMX 512 SECODER AND TRANSFORMER 12 VOLT 32 CHANNEL
FEATURES:
- 12 digit dipswitch for function setup
- Fade time, Speed & Program setup available
- 4 channels for RED, GREEN, BLUE and WHITE
- Standard DMX-512
- 7 built in Programs available
- White, Color & White, RGB modes
8pcs of 6pin terminal sockets 12V/6 A per output , total 12A max.
8pcs of 6pin terminal sockets 15V/6 A per output , total 10A max.
8pcs of 6pin terminal sockets 18V/6 A per output , total 8A max.
8pcs of 6pin terminal sockets 24V/6 A per output , total 6A max.
SPECIFICATIONS:
POWER INPUT: 3-PIN VDE/BS/IEC/UL PLUG
110-120VAC(3.2A) / 220-240VAC(1.6A), 50/60HZ.
POWER OUTPUT: 8PCS OF 6-PIN TERMINAL SOCKETS, TOTAL 12V/12A; 15V/10A; 18V/8A; 24V/6A MAX.
DATA INPUT: DMX 512 OF 3-PIN XLR MALE SOCKET
DATA OUTPUT: DMX DATA OUT OF 3-PIN XLR FEMALE SOCKET
POWER SUPPLY: 100-240VAC I/P, 24VDC O/P, 150W; LISTED UL, CE, GS
HOUSING: SHEET METAL BLACK POWDER FINISH
INGRESS PROTECTION RATING: IP20
CONTROL: DMX-512 (1990)
CONNECTION: 6PIN TERMINAL
LISTING: CE CERTIFIED
OPERATION TEMPERATURE: -10 DEG C TO +50 DEG C
STORAGE TEMPERATURE: -20 DEG C TO +70 DEG C
DIMENSION: 267.5(L) X 166(W) X 101(H)MM
WEIGHT: 1.8KG
ITEM #: IL-DMX-DECO-32C
DMX512 MULTIFUNCTIONAL RGB CONTROLLER WITH DMX SUPPORT
CAN BE USED TO CONTROLL OUR RGB DEVICES, SUCH AS LED STRIPS, MODULES, ROPE LIGHTS, BORDER LIGHTS
SPECIFICATIONS:
120/240V AC,360/720W,IP66,L165XW120XH50 MM
FEATURES:
SUPPORT DMX-512 STANDARD PROTOCOL;
CAN CONTROL UP TO 3 SIGNAL OUTPUTS, SUCH AS RED, GREEN AND BLUE LED LIGHT SOURCES;
HAVE MORE THAN 30 EDITABLE RGB COLOR CHANGING PATTERNS, WITH MANUAL CONTROL BUTTON;
CAN WORK WITH A STANDARD DMX SIGNAL GENERATOR (DMX CONSOLE, PC WITH EFFECTS GENERATOR SOFTWARE) TO CREATE ENHANCED COLOR AND SOUND CHANGE EFFECTS;
EASY AND SIMPLE TO CREATE WORLD-CLASS COLOR/SOUND CHANGING EFFECTS WITH OUR RGB LED DEVICES, SUCH AS ROPES, BRICKS AND PANELS, MODULES, STRIPS, TILES AND MORE.
ITEM#: IL- DMX512-MFC
IMPACT LIGHTING INC. STAND ALONE DMX CONTROLLER
CONTROL YOUR LIGHTS WITHOUT ANY COMPUTER
DESIGNED PRIMARILY FOR ARCHITECTURAL APPLICATIONS, OUR EASY STAND ALONE SOFTWARE MAKES IT POSSIBLE TO WRITE LIGHTING SCENES INTO THE MEMORY OF OUR DMX PRODUCT LINES. ONCE THE LIGHTING SHOWS ARE TRANSFERRED TO THE INTERFACE, THEY CAN BE TRIGGERED BY AN EXTERNAL CONTROL KEYPAD, BY THE INTERNAL CLOCK/CALENDAR, OR SIMPLY FOLLOWING A PREPROGRAMMED SEQUENCE. SIMPLE FOR ANYONE TO USE, NO COMPUTER OR SPECIAL LIGHTING PROGRAMMING SKILLS ARE REQUIRED TO START USING THIS SOFTWARE.
ITEM#: IL-M-STANDALONE
SOFTWARE DOWNLOAD
Easy Stand Alone
IMPACT LIGHTING INC. DMX ADVANCED CONTROLLER FOR LIGHTING CONTROL SOFTWARE
WITHOUT DOUBT, IMPACT LIGHTING INC DMX WORLD STANDARD CONTROLLER IS THE WORLD’S MOST COMPLETE LIGHTING CONTROL PACKAGE THESE DAYS. OUR PRODUCTS HAVE CONTINUED TO EVOLVE DURING THE PAST FEW YEARS AND HAVE BECOME A STANDARD IN LIGHTING CONTROL SOFTWARE. NO MATTER WHAT YOU’RE LOOKING AT (ARCHITECTURAL INSTALLATIONS, DISCOTHEQUES, SOUND & LIGHTING, THEATRE, CONCERTS, ETC.) IMPACT LIGHTING INC WILL DEFINITIVELY MEET YOUR EXPECTATIONS.
OUR SOFTWARE CAN BE USED ALONG WITH IMPACT LIGHTING INC’S DMX CONTROLLER, PARTICULARLY USEFUL FOR LIVE APPLICATIONS. MOREOVER, LIGHTING SCENES CAN BE QUICKLY SYNCHRONISED WITH MUSIC AND VIDEO USING OUR EASY SHOW SOFTWARE AND, IF NECESSARY, A TIME CODE SIGNAL FOR SOUND & LIGHTING. SCENES CAN ALSO BE TRIGGERED BY THE COMPUTER’S CLOCK/CALENDAR (MUSEUMS LOVE THIS)... THE POSSIBILITIES ARE ENDLESS!
SYSTEM REQUIREMENTS
• PC WITH 1,6 GIGAHERTZ OR HIGHER PROCESSOR CLOCK SPEED RECOMMENDED; 1 GHZ MINIMUM REQUIRED (SINGLE OR DUAL PROCESSOR SYSTEM)
• WINDOWS XP OR VISTA (32BITS)
• 1 GIGABYTE (GB) OF RAM OR HIGHER RECOMMENDED (512 MB MINIMUM SUPPORTED)
• SUPER VGA (800 X 600) OR HIGHER-RESOLUTION VIDEO ADAPTER AND MONITOR
• 128 MB OF VIDEO RAM FOR THE 3D VISUALIZER (32 MB MINIMUM SUPPORTED)
ITEM#: IL-M-ADVANCE
SOFTWARE DOWNLOAD
Easy Stand Alone
IMPACT LIGHTING INC’S AURORA DMX
With just a few clicks, you could change the shape of all buttons: scenes, pages, power, select, fader as
well as customizing colors, background picture and logos...
At the end, there will be over 50 millions design possibilities. You can save your designs and make them
available for other users.
Once the JPG 300 dpi image has been downloaded and printed you can install it under the Intelligent
glass panel.
SPECIFICATION:
Touch sensitive control panel, State of the art design and technology, Flash memory card
(miniSD), virtually unlimited capacity, 512 DMX OUT channels, Integrated clock/calendar, Built-in microphone,
USB 2.0 connection, ETHERNET ready, RS 232, Optional remote control
ITEM #: IL-DMX-AURORA
SOFTWARE DOWNLOAD
ESA Pro/Stick
6 WAY DMX DISTRIBUTION
FEATURES:
DMX distributor with one input and 6 output.
Absolutely electric isolation between input and output, or between output and output.
Every DMX output features a independent driver, data + & data - indicator.
DMX switch is incorporated allowing to isolate from the malfunction caused by DMX input.
Input and output with a set of power supply respectively and 1A fuse.
6 WAY ISOLATED DMX SPLITTER-WALLMOUNT
SPECIFICATIONS:
POWER INPUT: 12-24VDC
DATA IN & THRU: 3-PIN TERMINAL SOCKET
OUTPUT: 6PCS OF 3-PIN TERMINAL SOCKETS
HOUSING: POLYCARBONATE
IP RATING: IP20
CONTROL: DMX 512 (1990)
LISTING CE: CERTIFIED
OPERATION TEMPERATURE: -10 °C TO + 50 °C
STORAGE TEMPERATURE: -20 °C TO + 70 °C
WEIGHT: 0.25 KG
DIMENSION: 195(L) X 110(W) X 22(H)MM
ITEM #: IL-DD-6WM
6 WAY DMX DISTRIBUTION
FEATURES:
DMX distributor with one input and 6 output.
Absolutely electric isolation between input and output, or between output and output.
Every DMX output features a independent driver, data + & data - indicator.
DMX switch is incorporated allowing to isolate from the malfunction caused by DMX input.
Input and output with a set of power supply respectively and 1A fuse.
6 WAY DMX SPLITTER
SPECIFICATIONS:
POWER INPUT AC 120V~60HZ / AC 230V~50HZ
DATA IN & THRU 3-PIN / 5-PIN XLR MALE SOCKET
OUTPUT 6PCS OF 3-PIN / 5 PIN XLR FEMALE SOCKET
HOUSING SHEET METAL WITH POWDER PAINTING
IP RATING IP20
CONTROL DMX 512 (1990)
LISTING CE CERTIFIED
OPERATION TEMPERATURE -10 °C TO + 50 °C
STORAGE TEMPERATURE -20 °C TO + 70 °C
WEIGHT 2 KG
DIMENSION 19” X 1U (482 X 125 X 44 MM)
ITEM #: IL-DD-6
IMPACT™-96-DMX CONTROLLER
FEATURES:
1.07 billion (30 bit) RGB color mixing
Assign individual addresses to each IMPACTSTAR®-RGB-DMX lamp.
20 built-in color-changing programs
Control 96 devices (lamps, IMPACT™-96-DMX controllers, or IMPACT™ Repeaters™)
Use Star Orchestra™ 3.02, a Windows-based software program, to create color-changing programs
DMX compatible, with auto-detection, when the IMPACT™-96-DMX is connected to a DMX controller
Use the IMPACT™Repeater™ to connect an additional 32 devices. Multiple IMPACT™ Repeaters™ can be used.
PAVO™-DIAL-DMX 12V CONTROLLER
The user-friendly IMPACT-DIAL-DMX controller is now available for 12VDC RGB lamps.
Single lamp RGB LED color-changing lighting system controller.
7 mode settings for single colors and color-changing patterns.
Four positions: Function, Speed, Brightness and Contrast for easy operation.
Three-channel DMX output: Ch. 1 (R), Ch. 2 (B), Ch. 3 (G).
IMPACTSTAR®-RGB-DMX AND IMPACT™-96-DMX
ImpactStar® RGB-DMX lamps are individually addressable with separate IDs, thus providing a wide-range of color-changing effects when controlled by the IMPACT™-96-DMX Controller.
FEATURES
5W ImpactStar® RGB LED lamps
Assign an individual ID address to each lamp
10 built-in color-changing programs
Control up to 96 ImpactStar®-RGB-DMX lamps with the IMPACT™-96-DMX Controller and ImpactStar® IR Remote Controller
Connect more lamps using the PAVO™-Repeater
Min. 70% lumen maintenance after 35,000 hours
Low power consumption
The IMPACTSTAR®-RGB-DMX lamps can be connected directly to and controlled by a standard DMX controller
SPECIFICATIONS - IMPACT™-96-DMX
ELECTRICAL:
Power Supply: 8 ~ 17VAC
Voltage: 9 ~ 19VDC
Current: <500mA
COMMUNICATION
Interface: RS485 and DMX
Fan-Out Drive: 96 devices max.
INTERFACE:
Display: 8 x 2 Text Mode LCD
Input Interface: 6 Function Keys / IR receiver
Built-in Programs: 10
ENVIRONMENT:
Operation Temperature: 0~50°C
Storage Temperature: -20~60°C
Humidity: 10~90%
Dimensions: 127 x 76 x 42mm
Weight: 0.3kg
QUICK CONNECTION 4-PIN CABLE BUS
Use the QCB-4-30 to quickly connect
the IMPACTSTAR-RGB-DMX lamps.
4 CHANNEL LOW VOLTAGE RELAY RECIEVER
RECEIVES WIRELESS SIGNALS FROM OUR WIRELESS LIGHT SWITCHES AND MAGNETIC CONTACTS. CAN BE USED AS A RELAYNOR A MOMENTRY SWITCH.
4 OR 8 CHANNEL LOW VOLTAGE RELAY RECEIVER
ITEM#: IL-RWS-4 RELAYS
8 CHANNEL LOW VOLTAGE RELAY RECIEVER
RECEIVES WIRELESS SIGNALS FROM OUR WIRELESS LIGHT SWITCHES AND MAGNETIC CONTACTS. CAN BE USED AS A RELAYNOR A MOMENTRY SWITCH.
4 OR 8 CHANNEL LOW VOLTAGE RELAY RECEIVER
ITEM#: IL-RWS-8 RELAYS
HAND HELD WIRELESS AND BATTERILESS SWITCH FOR CONTOLLING 4 AND 8 RELAY TRIGGERS
AVAILABLE IN BLACK AND WHITE
SIZE: 3” X 2”
ITEM#: IL-TRIG-02
WIRELESS AND BATTERILESS SWITCH FOR CONTOLLING 4 AND 8 RELAY TRIGGERS
WALL MOUNT WIRELESS 4 OR 8 CHANNEL LOW VOLTAGE RELAY RECEIVER.
AVAILABLE IN BLACK AND WHITE
SIZE: 2.75” X 4.25”
ITEM#: IL-TRIG-1
WIRELESS AND BATTERILESS WALL MOUNT TOGGLE SWITCH FOR CONTROLLING ONE RELAY TRIGGER
A ON AND OFF TOGGLE SWITCH.
SIZE: 2.75” X 4.25”
ITEM#: IL-WM-TS
KEYPAD FOR TRIGGERING DMX AND NON DMX SHOWS
THIS KEYPAD PROVIDES A VISUALLY APPEALING WAY TO GET NUMERIC DATA TO YOUR CONTROL SYSTEM. THE BOARD IS A SERIES OF PUSHBUTTON SWITCHES THAT PROVIDE INPUT FOR DMX AND NON DMX APPLICATIONS.
SIZE: 2.75” X 4.25”
ITEM#: IL-KEY-01
DOWNLOAD PDF
